Create MiaRec IP Phone Service

Open Cisco Unified Communications Manager administration web portal.

  1. Select the Device - Device Settings - Phone Services menu item.

  2. Click on Add New

  3. Type in the Service Name: MiaRec (you may use different name here)

  4. Type in the Service Description: MiaRec Phone Service

  5. Type in the Service URL:

    http://0.0.0.0/cisco_phone_service/active_call?name=#DEVICENAME#
    

    Replace 0.0.0.0 with your MiaRec server ip-address. This URL should point to MiaRec web portal. If the web portal is running on port different from the default 80, then include port into URL, like http://1.2.3.4:8080/cisco_phone_service.... It is recommended to use direct ip-address instead of domain name because name resolution may not work from within Cisco IP phone.

    Alternatively, you can use the following URLs, which allow to control recording in one-click:

    URL Description
    http://0.0.0.0/cisco_phone_service/call/active_call/ondemand/keep?name=#DEVICENAME# Enable recording in one-click
    http://0.0.0.0/cisco_phone_service/call/active_call/ondemand/discard?name=#DEVICENAME# Disable recording in one-click
    http://0.0.0.0/cisco_phone_service/call/active_call/muting/mute?name=#DEVICENAME# Pause recording in one-click
    http://0.0.0.0/cisco_phone_service/call/active_call/muting/unmute?name=#DEVICENAME# Resume recording in one-click
  6. Check Enable option.

  7. Save it.

See below screenshot for details.

Create MiaRec IP Phone Service