Create a SIP Trunk that points to the recorder

Use the Device > Trunk menu option in Cisco Unified Communications Manager Administration to create SIP trunk that points to the recorder.

  • Ensure that the Media Termination Point Required check box is unchecked.
  • Select the Run On All Active Unified CM Nodes check box.

Create SIP Trunk

Make sure the SIP Privacy option is set to None, otherwise you will see in call details a text "Anonymous" instead of user's extension.

Create SIP Trunk

In SIP Information section configure:

  • Destination Address should point to ip-address or DNS name of the recorder server
  • Destination Port should match the port on which MiaRec recorder is listening for messages from CUCM (see configuration of MiaRec below)
  • Select the previously created SIP Trunk Security Profile for the recorder
  • Select the previously created SIP Profile for the recorder

Create SIP Trunk