07. Configure UCID

UCID needs to be enabled for Signaling Rules that are defined for Session Manager and MiaRec. Navigate to Domain Policies -> Signaling Rules. Select the policy for Session Manager and select the UCID tab. Click Edit, check box for Enabled and type in a unique value in Node ID field. Select Finish to save configuration.

Perform similar steps for MiaRec signaling rule.


  • UCID will need to be enabled on the Signaling rule for MiaRec and the one for SM.

  • Node ID should be unique on the SBC and across the solution.

  • Protocol Discriminator should match what is on CM configuration. This is typically 0x00 as that is the recommended value.

Avaya SBCE SIPREC configuration