The Linksys WRTP54G is a Wireless-G Broadband Router with 2 Phone Ports for Vonage.
It is four devices in one box. First, there's the Wireless Access Point, which lets you connect both screaming fast Wireless-G (802.11g at 54Mbps) and Wireless-B (802.11b at 11Mbps) devices to the network.
There's also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together.
The Router function lets your whole network share a high-speed cable or DSL Internet connection.
The fourth function is the phone adapter which enables high-quality feature-rich telephone service through your high-speed connection.
There are two standard telephone jacks, each operating independently -- like having two phone lines.
This guide contains information about how to use MiaRec for recording calls on Linksys WRTP54G.
- Record calls on single Linksys WRTP54G device
- Record calls on multiple Linksys WRTP54G devices simultaneously
Record calls on single Linksys WRTP54G device
You need:
- HUB (see What is a HUB?)
- Router (see note 1)
- Computer with Windows 2000, 2003, XP or Vista
- MiaRec Solo license
Note 1: You may use your existing router, if you have one, or purchase new one (any standard router will be convenient). Linksys WRTP54G has built-in router, but you cannot use it. You need to have a separate router.
Below network diagram shows how all devices should be connected:
Linksys WRTP54G on this diagram is shown as the Voip Adapter.
A HUB should be placed between Voip Adapter and Router.
Computer with MiaRec should be connected to the same HUB.
Such network scheme will allow you to record calls on Linksys WRTP54G.
Read also:
Should you have any problem or question related to using MiaRec Solo for recording calls on Linksys WRTP54G, please, contact our technical support by e-mail or phone.
Record calls on multiple Linksys WRTP54G devices simultaneously
You need:
- Switch with Port Mirroring function (see What is Port Mirroring?)
- Server with Windows 2000, 2003, XP or Vista
- MiaRec Business license for appropriate number of lines
Below network diagram shows how all devices should be connected:
Such network scheme will allow you to record multiple calls simultaneously.
Please, note, Port Mirroring function should be configured appropriately on the switch.
Please, check below a list of switches, which support Port Mirroring function.
Configuration guides for some models of switches are also available on this site.
Read also:
- What is a Port Mirroring?
- A list of Switches with Port Mirroring support
- Configuration guides of Port Mirroring function
Should you have any problem or question related to using MiaRec Business for recording calls on Linksys WRTP54G, please, contact our technical support by e-mail or phone.
